* CDi Series´Â ÀνºÅç¿ë¿¡ ÀûÇÕÇÏ°Ô µðÀÚÀÎµÈ ¸ðµ¨ÀÔ´Ï´Ù.
* CDi1000, CDi2000,CDi4000,CDi6000ÀÇ 4°¡Áö ¸ðµ¨ÀÌ ÀÖ½À´Ï´Ù.
* ³»ÀåµÈ DSP : X-over, EQ ÇÊÅÍ, Delay, Output limiter±â´É
* High and Low – impedance °â¿ë°¡´É
¢º »ó¼¼½ºÆå
Minimum Guaranteed Power
CDi 1000
CDi 2000
CDi 4000
CDi 6000
Per channel, both channels driven
2 ohm Dual (per channel) 4 ohm Dual (per channel) 8 ohm Dual (per channel) 4 ohm Bridge-Mono 70V Dual (per channel) 140V Bridge-Mono
700W*500W275W1,400W*500W1,000W
1,000W*800W475W2,000W*800W1,600W
1,600W*1,200W650W3,200W*1,000W2,000W
3,000W*2,100W1,200W6,000W*2,500W*5,000W
With 0.5% THD*With 1% THD
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz)
+0/–1 dB
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted)
100 dB
Damping Factor (8 ohm): 20 Hz to 400 Hz
> 500
Input Stage
Input is electronically balanced and employs precision 1% resistors
AC Line Current
CDi 1000: 11.50A, CDi 2000: 11.93A, CDi 4000: 11.75AAt idle: Draws no more than 45 watts.
Crosstalk (below rated power) 20 Hz to 1 kHz
> 70 dB
Input Impedance (nominal)
20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)DualBridge mono
2–8 ohms4–16 ohms
Voltage Gain (at 1 kHz, 8 ohm rated output)
CDi 1000: 30.5 dB, CDi 2000: 32.9 dB, CDi 4000: 34.2 dB
Sensitivity (at 8 ohm rated output)
1.4V
Maximum Input Signal
+22 dBu typical
Operating Temperature
0¡Æ C to 40¡Æ C at 95% relative humidity (non-condensing)
AC Line Voltage and Frequency Configurations Available (¡¾ 10%)
100V, 120V-240V, 50/60 Hz
Ventilation
Flow-through ventilation from front to back
Cooling
Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface)
EIA Standard 19 in. Wide (EIA RS-310-B)x 3.5 in. (8.9 cm) High x 12.25 in. (31.1cm) DeepCDi 6000 is 16.2 in. (41.15 cm) deep.
Net Weight
CDi 1K, 2K, 4K: 19 lb (8.6 kg).CDi 6K: 24 lb (10.9 kg).
Shipping Weight
CDi 1K, 2K, 4K: 22 lb (10.0 kg).CDi 6K: 30 lb (13.6 kg).