EUROPOWER PMP4000


멀티 FX 프로세서 & FBQ 피드백 디텍션 시스템이 탑재된 1600W, 16채널 파워드 믹서




울트라 콤퍽트 2 x 800와트 스테레오 파워드 믹서 (1600와트 브릿지 모드)

혁신적인 앰프 기술 : 거대한 힘, 놀라운 음질 성능과 슈퍼 경량

컴팩트 디자인이 가져다 주는 공간적 활용 극대화

16 채널 믹서 섹션, 8모노, 4 스테레오 + 별도의 CD/테이프 입력/출력단자

리버브, 코러스, 플랜저, 딜레이, 핏치, 쉬프터 등 다양한 멀티 이팩터를 포함, 100개의 프리셋과 2 개의 스튜디오급 24비트 디지털 FX프로세서

혁신적인 FBQ 피드백 감지 시스템은 쉽고 빠르게 피드백 제거를 위한 주파수 보유

전환 가능한 Pad 및 Clip LEDs, 8개의 고품질 마이크 preamps

콘덴서 마이크로폰을 위한 +48V 팬텀 파워가 탑재된 8 고품질 Xenyx mic 프리앰프

모든 모노 채널에 효과적인, 뮤지컬 3밴드 EQ, 맞바꿀 수 있는 로우컷 필터, 클립 LED

모니터 또는 메인 출력단자의 주파수 보정을 위한 스테레오 7밴드 그래픽 EQ

가라오케 용으로 가수의 목소리를 제거해 주는 보이스 캔슬 기능

선택 가능한 스테레오 (메인 L/R), 더블 모노 (메인/모니터) 또는 브릿지 모노 앰프 모드

향상된 스테레오 이미지를 위한 XPQ 3D 스테레오 서라운드 이펙트

외부 신호 소스 연결을 위한 조정 가능한 스테레오 CD/ 테입 입력단자

추가된 기기들을 위한 다기능 스테레오 프리앰프 출력단자

내부 스위치-모드 전원공급, 무소음 오디오, 탁월한 응답, 저소비전력

고품질 부품과 엄격한 제조공정으로 제품의 긴 수명 보장

BEHRINGER 독일 본사에 의한 설계

크기 122 x 476 x 460 mm

무게 10.4kg



The new BEHRINGER PMP Powered Mixers (2 x 800-Watt stereo, 1600-Watt bridged mode) produce even more power than their predecessors while maintaining a famously low weight and high efficiency. These mixers employ Class-D technology including a new switch-mode power supply, significantly reducing weight and heat. The 20-channel PMP6000 features 12 built-in XENYX preamps, the 16-channel PMP4000 features 8 built-in XENYX mic preamps, and the 10-Channel PMP1680S features 8 high-quality built-in mic preamps. All three models feature 24-bit FX processors and FBQ Feedback Detection.
What is Class-D Technology?
Instead of operating relatively continuously like Class AB circuits, Class-D amps switch on and off thousands of times per second, delivering power only when needed. In other words, the amplifier is either fully on or fully off , which significantly reduces power losses from the output devices given off as heat. Less heat means our amps don’t need massive heat sinks, and that means we can make them lighter. Our no-compromise design means the new PMP mixers will deliver full power with incredible fidelity all night long, without the need for lengthy rest cycles.
When used in conjunction with switching-mode power supplies, which don’t require huge and heavy transformers, our Class-D amplifiers provide tremendous dynamic punch and superior fidelity. The resulting speaker systems are much lighter, making them easy to transport and set up.
Massive Mono or Stunning Stereo
Our latest PMP give you the choice of 2 x 800-Watt stereo, 2 x 800-Watt dual mono mode (giving you a mono version of the main signal through one powered output plus a mono version of all monitor send signals through the second powered input) or 1,600-Watt bridged mono sound. Whether the center of attention happens to be a folk trio, a speech, or a synth-rock band with mind-boggling stereo patches, PMP mixers can accommodate. This sonic versatility also makes it an excellent choice for churches, where vocals and stereo recordings often share face time.
Classic Control, State-of-the-Art Sound
Leave the mic preamps at home, because the quality of sound that was once only available in the studio is ready to go wherever you do. Built-in, boutique-caliber mic preamps with switchable +48 V phantom power make it possible to use either dynamic or condenser mics with the PMP Series. The PMP6000 gives you 12 mic inputs while the PMP4000 and PMP1680S each give you 8 mic inputs.
Built-in Digital Effects Processor
The new generation of PMP mixers come equipped with 24-bit FX processors, giving you 100 mind-blowing digital effect presets such as delay, chorus and reverb. Apply them to any channel, as well as to the monitors and main output. In case you’re pulling double duty as sound engineer and performer, the FX processors features a footswitch jack for remote on/off . Of course, if you have treasured outboard gear you’ve grown attached to, these mixers can integrate them into the mix while leaving out the built-in FX processor.
Changing the Channels
The PMP Series gives you excellent flexibility to accommodate whatever a performance requires. You get 12 (PMP6000) or 8 (PMP4000 and PMP1680S) channels for mics, guitars and other mono instruments. Stereo channels 13-20 (PMP6000), 9-16 (PMP4000) and 7-10 (PMP1680S) are designed to work in pairs as stereo channels, or independently for more mono instruments. All mono channels have 3-band EQ, switchable Low cut filter for eliminating infrasonics, and Clip LEDs to indicate when the input signal is too hot.
A STANDBY switch (PMP6000 and PMP1680S) mutes all mic channels during breaks, preventing the microphones from picking up noise or interference. You can leave all faders untouched while you play a CD via the CD/TAPE inputs.
The FBQ Feedback Detection system automatically shows you which frequencies are causing feedback. Just touch the FBQ button and watch the red LEDs on the 7-band graphic EQ pinpoint show you which frequencies to adjust for optimized sound, without the feedback.
The Ins and Outs
Use the CD/TAPE IN RCA inputs to feed in external stereo signals from CD players or tape decks. The VOICE CANCELLER switch eliminates the vocals from pre-recorded music for instant karaoke applications.
CD/TAPE OUT RCA outputs send line-level signals from the mixer to a recording device. The left and right output ¼" connectors can be used for a variety of purposes, including connecting more power amps. Connect monitor power amps or active monitor speakers to the MON SOUND output. Powered outputs on these mixers are available in professional Speakon-compatible format.
Small, Simple, Superb
Medium-sized events call for a lightweight (PMP6000: 13.1 kg/ 28.9 lbs; PMP4000: 0.4 kg/22.9 lbs; PMP1680S: 9.9 kg/28.8 lbs), easy-to-use powered mixer. BEHRINGER powered mixers are the most efficient, affordable mixers for the job, and are even suitable for use as pure analog mixers or as pure power amplfiers. With new technological advantages and incredible built-in features, it’s easier than ever to lend exceptional sound quality to all kinds of public performances.